|
|
 |
 |
|
Introducing the ultimate choice in aerobatic capable 300 class size RC electric
6 channel 3D RTF helicopter, the Eagle 50!
The Eagle 50 is ready to fly out of the box within minutes. Everything needed
to fly is included and installed such as a battery pack, motor, electronic and
a 6 channel 72Mhz FM radio system. All that is needed are 8 "AA" batteries for
the transmitter. Plus, each Eagle 50 is test-flown at the factory to ensure
precise performance and control which makes it truly ready to fly right from
the box.
We are also proud to offer this magnificent model as 3D capable right out of
the box. Combining the knowledge of RC nitro collective precision along with
the most advanced micro electric design concepts, we have arrived at a model
that excels prepared to wipe out the competition. The Eagle 50 offers
collective pitch control that will let helicopter pilots to fly in almost any
direction. Transitioning from forward flight to hover with smooth, solid
control is a cinch and negative pitch is a breeze for aerobatics like loops and
rolls.
The installed mixing board controls mixing of the main and tail rotors. The
board also contains 2 speed controls, a peizo gyro for tail stabilizing and a
BEC circuit that supplies power to the receiver and servos
Expect only the best as you experience tight, precise control and quick
response as the Eagle 50 will dazzle you with agility and speed. Using the
basics of micro electric design to keep components light and durable while
distributing heat away from electronic, the Eagle 50 is not only precise, but
also efficient. When you combine precision and efficiency and add beauty, you
will arrive at the Eagle 50: The Ultimate Super-Micro Electric Helicopter.
|
 |
|
 |
 |
| Advanced component configuration design
provides perfect balance
|
High Performace Tail motor provides
precise control
|
|
 |
 |
| Standard metal head block provides solid
and smooth control
|
CCPM mode. 3D conversion and alterable
pitch system
|
|
Pre-built 300 size Eagle 50 Mini RC
Helicopter, zero assembly time, Ready to fly out of the box
|
6-channel FM 72 Mhz multifunctional
transmitter with 3D conversion. PIT and PLT adjusting knob
|
CCPM mode. 3D conversion and alterable
pitch system
|
4-in-1 receiver unit (electronic gyro,
mixer, motor controller, receiver)
|
Highly efficient tail motor with
elaborate structure
|
Computer Simulation Cable included
(Computer simulation software not included)
|
English User Manual
|
 |
|
|
22 inch (550 mm) |
Tail Rotor Diameter:
|
6 inch (150 mm) |
|
|
23 inch (580 mm) |
Overall Height:
|
7 inch (180 mm) |
All-up Weight:
|
19 oz (540 g) battery included |
Battery:
|
Ni-MH 9.6V 650mAh |
Power:
|
370 carbon brush motor |
Servo:
|
3 x 7.6g |
Control:
|
Rubber, alieron, elevator and throttle,
CCPM mode, 3D conversion and alterable pitch system |
Radio System:
|
6 Channel FM 72Mhz, include a pair of
interchangeable crystal
|
Charger:
|
Quick 110V wall charger |
Computer Simulation:
|
Computer Simulation Interface Serial cable
|
|
|
|
|
|
